Kyocera Copystar CS 3011i Service Manual page 429

5. Move the exposure unit to the cutting
lack part.
6. Peel off the sheet.
7. Release the hook and then remove the
FFC cover.
8. Remove the FFC from the connector.
9. Detach two screws and then remove
the LED unit.
10. Check or replace the LED unit and reat-
tach the removed parts in original posi-
tion.
Hook
Figure 1-5-64
LED unit
Screw
Figure 1-5-65
1-5-39
2RG/2RH
FFC cover
Sheet
Exposure unit
Screw
FFC