Kyocera Copystar CS 3011i Service Manual page 192

U252 Destination
(Message: Set Destination)
Contents
Switch the operations and screens of the main unit according to the destination.
Purpose
Execute after initializing the backup RAM, in order to return the setting to the value before replacement or
initialization
Method
1.Press the [Start] key.
2.Select the item to set.
Japan Metric *1
Inch *2
Europe Metric *2
Asia Pacific *2
Australia *2
China *2
Korea *2
*1: 100 V model only, *2: Except 100 V model
*: Initial setting: Destination
3.Press the [Start] key.
*: Initializes according to the destination
4.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
*: An error code is displayed when an error occurs.
When errors occur, turn the power switch off then on, and execute initialization using maintenance
mode U252.
Error codes
Items
Japan metric
Inch
Europe Metric
Asia Pacific
Australia
China
Korea
Items
0001 Controller (Entity Error)
0002 Controller error
0020 Engine error
0040 Scanner error
Contents
Contents
1-3-109
2RG/2RH