Kyocera Copystar CS 3011i Service Manual page 178

Items
Eject Unlock(50)
Eject Unlock(Fix)
Eject Unlock(Full)
Punch
Punch Move
Eject Conv(H) *2
Eject Conv(L) *2
*1: 3000-sheet DF only, *2: 1000-sheet DF only
*: To stop the operation, press the [Stop] key.
Method: Solenoid
1.Select the item to operate.
2.Press the [Start] key.
*: The operation starts.
Items
Sub Tray *1
Save Drum *1
Punch
*1: 3000-sheet DF only
*: To stop the operation, press the [Stop] key.
Method: Mail Box
1.Select the item to operate.
2.Press the [Start] key.
*: The operation starts.
Items
Conv
Branch
*: To stop the operation, press the [Stop] key.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Drive the DF exit release motor at the 50-sheet bundle position
Drive the DF exit release motor at the fixed position
Drive the DF exit release motor at the full open position
Drive the punch motor.
Drive the punch slide motor.
Drive the DF drum motor at high speed.
Drive the DF drum motor at low speed.
Turn the DF feed-shift solenoid 1 on
Turn the DF feed-shift solenoid 2 on
Turn the punch solenoid on
Drives the MB drive motor to convey paper
Drives the MB drive motor for feed-shift
1-3-95
Contents
Contents
Contents
2RG/2RH