Kyocera Copystar CS 3011i Service Manual page 308

Code Contents
0660 Hard disk encryption key
error
0670 Hard disk overwriting era-
sure error
0680 SSD error
The SSD cannot be
accessed, or the error occurs
when accessing to the SSD.
0800 Image processing error
JAM010X is detected twice.
Related parts
EEPROM
HDD
Main PWB
Replace the main PWB (see page 1-5-54).
HDD
Main PWB
Replace the main PWB (see page 1-5-54).
SSD
Replace the main PWB (see page 1-5-54).
Main PWB
Replace the main PWB (see page 1-5-54).
Main PWB
1-4-15
Check procedures/
corrective measures
1. Execute U004 if this occurs after the
EEPROM has been changed.
1. If an abnormal noise is heard from the
HDD, replace the HDD.
2. Check the SATA wiring between the
HDD and the main circuit PWB for loose
connection, disconnection and
damages, and that it is connected into
the correct terminal.
Main PWB: YC2,YC32
3. Replace the SATA cable.
4. Execute U024 to initialize (FULL) the
HDD (see page 1-3-29).
5. If an error is detected after executing
U024, replace the HDD.
1. If an abnormal noise is heard from the
HDD, replace the HDD.
2. Check the SATA wiring between the
HDD and the main circuit PWB for loose
connection, disconnection and
damages, and that it is connected into
the correct terminal.
Main PWB: YC2,YC65
3. Replace the SATA cable.
4. Execute U024 to initialize (FULL) the
HDD (see page 1-3-29).
5. If an error is detected after executing
U024, replace the HDD.
1. Turn the power switch and the main
power switch off. After 5s passes, turn
the main power switch and the power
switch on.
2. Reinstall the SSD on the main PWB.
3. Retrieve the SSD storage data at U026,
and then initialize the SSD at U024.
4. Replace the SSD.
2RG/2RH