Kyocera Copystar CS 3011i Service Manual page 37

The release of the scanner lock
1. Remove the scanner lock cover with a
flat-bladed screwdriver.
2. Reinstall the cover in the opposite
direction, so both arrows face each
other.
* : Release the lock of the scanner unit.
* : If not releasing the lock, the error mes-
sage (C3100) is displayed when input-
ting the power source.
Connecting the Power Cord
1. Connect the power cord to the main unit
and the outlet.
2. Fix the ground terminal of the power cord
to the ground near the outlet by the
screw.
Scanner lock
cover
[Locked]
Wall ooutlet
1-2-10
Scanner lock
cover
Flat screw
driver
[Released]
Figure 1-2-14
Power code
Figure 1-2-15
2RG/2RH-1