Kyocera Copystar CS 3011i Service Manual page 46

6. Connect two connectors of the hard disk to two connectors of the main PWB.
7. Fix the wire with three wire saddles.
8. Reattach the parts in the original position.
* : When installing a new HDD, it is automatically formatted at the first start-up.
* : The memory LED blinks when forming a preview image in an HDD after restart if data exists in the FAX
box.
Formatting a hard disk
1. Input "10871087" using the numeric keys to enter the maintenance mode.
2. Input "024" using the numeric keys and press the [Start] key.
3. Select [Format].
4. Select [Full].
5. Select [Execute].
6. Press the [Start] key to initialize.
7. Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
* : When an optional HDD is inserted into the main unit for the first time, it must be formatted before use.
Formatting will delete all existing data on the HDD.
Wire saddles
Connectors
Main PWB
Figure 1-2-21
1-2-19
2RG/2RH