Kyocera Copystar CS 3011i Service Manual page 16

Items
Separation system
Cleaning system
Charge erasing system
Fusing system
Memory
Large capacity storage
Standard
Inter
Interface
Option
Temperature
Humidity
Operating
Above the
Environment
sea level
Brightness
Dimensions
Dimension (W × D × H)
Weight
Space Required (W × D)
Power source
*1: *1: Up to upper limit height line in the cassette.
*2: *2: When two optional interface are installed, a fax line can not be installed.
*3: When IB-50 or IB-51 is installed, only one fax line can be installed.
30 ppm model
Small diameter separation and separation needle (Impressing DC voltage)
Counter blade system
Exposure by cleaning lamp (LED)
Heat and pressure fusing with the heat roller and the press roller
Heat source: halogen heater
Abnormally high temperature protection devices: thermostat
2.0GB
SSD 32GB:
USB Interface Connector: 1 (Hi-Speed USB) *3
Network interface: 1
(10 BASE-T/100 BASE-TX/1000 BASE-T)
Hi-Speed USB: 4 (USB Flash memory slot)
eKUIO: 2 *2
Fax: 2 *3
Wireless LAN: 1
10 to 32.5°C/50 to 90.5°F
15 to 80%RH
2,500m/11,482 ft maximum
1,500 lux maximum
594 × 696 × 680mm
Approx. 58kg (without toner container)
31.82" × 19.97" 873 × 696mm (Using multi purpose tray)
100V AC,50/60Hz,13.0A
120V AC,60Hz,11.6A
220-240V AC,50/60Hz,6.5A
1-1-2
Specifications
35 ppm model
SSD 8 GB / Hard Disk 320GB
2RG/2RH