Kyocera Copystar CS 3011i Service Manual page 133

U070 DP magnification adjustment
(Message: Adjust DP Motor Speed)
Contents
Adjusting the magnification for DP scanning.
Purpose
Adjusted if the magnification is incorrect in the auxiliary scanning direction when the DP is used
Adjustment
1.Press the [Start] key.
2.Press the [System Menu] key.
3.Place an original on the DP and press the [Start] key to make a test copy.
*: Check the duplex scanning by setting [Duplex] when test copying.
4.Press the [System Menu] key.
5.Select the item to adjust.
Sub Scan (F)
Sub Scan (B)
Main Scan
(CIS)
Sub Scan
(CIS)
6.By using the [+] [-] keys or the numeric keys, change the setting value.
For the copy example 1, increase the value.
For the copy example 2, decrease the value.
*: When the setting value is increased, the image get longer, and it shortens when the setting value is
decreased.
7.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Items
Adjusting the magnification for table scanning
Adjusts the 2nd side magnification in the sub
scanning direction when duplex scanning
Adjusts the 2nd side magnification in the main
scanning direction when duplex scanning
(CIS)
Adjusts the 2nd side magnification in the sub
scanning direction when duplex scanning
(CIS)
Original
Contents
Copy
Copy
example 2
example 1
Figure 3-12
1-3-50
2RG/2RH
Setting Initial
range setting
-125 to 125 -
-125 to 125 -
-100 to 100 -
-125 to 125 -
Data
varia-
tion
0.02%
0.02%
0.02%
0.02%