Kyocera Copystar CS 3011i Service Manual page 292

U989 HDD scan disk
(Message: HDD Scandisk)
Contents
Apply Scandisk to the HDD for data recovery.
Purpose
Execute recovery of HDD management data error by turning the power off while accessing to the HDD.
Method
1.Press the [Start] key.
2.Select [Execute].
Execute
3.Press the [Start] key to execute scandisk.
4.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
U990 Clearing the scanner lighting time
(Message: Clear Scanner Lamp ON Time)
Contents
Displays the accumulated CIS lighting time
Purpose
Execute to check the CIS usage.
Method
1.Press the [Start] key.
*: CIS accumulated lighting time is displayed in minutes.
CIS
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Items
HDD scan disk request
Items
Displays the accumulated CIS lamp lighting time
Contents
Contents
1-3-209
2RG/2RH