Kyocera Copystar CS 3011i Service Manual page 415

1-5-7 Fuser section
(1) Detaching and attaching the fuser unit
Procedures
1. Open the right cover 1.
2. Release the lock by pushing down the
lock lever and then remove the fuser
unit by griping the knobs.
3. Check or replace the fuser unit and
reattach the removed parts in the origi-
nal position.
4. When replacing the new unit, execute
as following procedure.
1)Performs maintenance mode U410
(Halftone automatic adjustment)
(See page1-3-128 )
Lock lever
Knob
Figure 1-5-40
1-5-25
2RG/2RH
Lock lever
Knob
Fuser unit