Kyocera Copystar CS 3011i Service Manual page 319

Code Contents
2600 PF drive motor error
(paper feeder)
After PF drive motor is driven,
the ready signal does not turn
to L within 2 s.
2610 PF drive motor error
(large capacity feeder)
After PF drive motor is driven,
the ready signal does not turn
to L within 2 s.
Related parts
PF drive motor
PF main PWB Replace the PF main PWB.
PF drive motor
PF main PWB
Replace the PF main PWB.
1-4-26
Check procedures/
corrective measures
1. To check the feed unit operation, exe-
cute U247 2PF- Motor ON (see page 1-
3-105).
2. Check the paper feed roller and drive
gear can rotate or they are not unusually
loaded and, if necessary, replace.
3. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
PF drive motor and PF main PWB
4. If the wiring is disconnected, shorted or
grounded, replace the wiring.
5. Replace the PF drive motor.
1. To check the feed unit operation, exe-
cute U247 LCF- Motor ON (see page 1-
3-105).
2. Check the paper feed roller and drive
gear can rotate or they are not unusually
loaded and, if necessary, replace.
3. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
PF drive motor and PF main PWB
4. If the wiring is disconnected, shorted or
grounded, replace the wiring.
5. Replace the PF drive motor.
2RG/2RH