Kyocera Copystar CS 3011i Service Manual page 155

U147 Setting the toner applying mode
(Message: Set Toner Apply Mode)
Contents
Mode selection for the operation to remove overcharged toner in the developer unit (Toner applying mode).
Purpose
Normally no need to change the setting. However change the mode when output in large quantities the
usual low coverage originals(Reference: less than 1 %)
*: Density is lowered if overcharged toner stays in the developer unit.
Method
1.Press the [Start] key.
2.Select the item to set.
Mode 0
Mode 1
*: Initial value: Mode 1
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
U148 Drum refresh mode setting
(Message: Set Drum Refresh Mode)
Contents
Sets the mode to use the drum refresh in the user adjustment.
Purpose
Change the setting if the drum refresh is frequently operated.
Setting
1.Press the [Start] key.
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Items
Mode
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Items
Nomal mode
Toner consumption mode
Sets Auto drum refresh
Contents
1-3-72
Contents
Setting range
0: Off
1: Short
2: Standard
3: Long
2RG/2RH
Initial setting
2