Kyocera Copystar CS 3011i Service Manual page 130

U066 Adjusting the table scanning timing
(Message: Adjust Table Leading Edge Timing)
Contents
Adjusts the leading edge timing for the table scanning.
Purpose
Executed if there is a regular error between the leading edges of the copy image and original.
Adjustment
1.Press the [Start] key.
2.Press the [System Menu] key.
3.Place an original and press the [Start] key to make a test copy.
4.Press the [System Menu] key.
Items
Front
5.By using the [+] [-] keys or the numeric keys, change the setting value.
For the copy example 1, increase the value.
For the copy example 2, decrease the value.
*: When the setting value is increased, the image moves forward, and it moves backward when the set-
ting value is decreased.
6.Press the [Start] key to set the setting value.
Precautions
Check the copy image after the adjustment. If the image is still incorrect, adjust the following in the mainte-
nance mode.
U034(P.1-3-36) > U065(P.1-3-45) > U066
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Contents
Adjusts the scanner leading edge margin. -30 to 30
Leading edge registration of the copy image (+1.0/-1.5 mm or less)
Original
Figure 3-10
1-3-47
Setting range
Copy
Copy
example 2
example 1
2RG/2RH
Initial Data
setting variation
0 0.16 mm