Kyocera Copystar CS 3011i Service Manual page 128

U065 Adjusting the magnification for table scanning
(Message: Adjust Scanner Motor Speed)
Contents
Adjust the magnification in the main and sub scanning direction of the table scanning.
Purpose
Adjusts the magnification in the main and sub scanning direction of the table scanning if the above incor-
rect
Precautions
The magnification adjustment in the main scanning direction could cause black streaks depending on the
content of the original document.
Adjust the magnification of the scanner in the following order.
U065(main scanning direction)(P.1-3-45)>U065((sub scanning direction)(P.1-3-45)
Method
1.Press the [Start] key.
2.Press the [System Menu] key.
3.Place an original and press the [Start] key to make a test copy.
4.Press the [System Menu] key.
5.Select the item to adjust.
Items
Main Scan
Sub Scan
Adjustment: Main Scan
1.By using the [+] [-] keys or the numeric keys, change the setting value.
For the copy example 1, increase the value.
For the copy example 2, decrease the value.
*: When the setting value is increased, the image widens, and it narrows when the setting value is
decreased.
2.Press the [Start] key to set the setting value.
Contents
Scanner magnification in the main scan-
ning direction
Adjusts scanner magnification in the sub-
scanning direction
Original Copy
example 1
Figure 3-8
1-3-45
Setting range
-75 to 75
-125 to 125
Copy
example 2
2RG/2RH
Initial Data
setting varia-
tion
0 0.02%
0 0.02%