Kyocera Copystar CS 3011i Service Manual page 125

U053 Adjusting the motor speed
(Message:Adjust Motor Speed)
Contents
Execute the motor speed fine tuning.
Purpose
No need to change the basic settings. Change the set value when an image failure occurs.
Method
1.Press the [Start] key.
2.Select the item to adjust.
*: The screen for adjusting is displayed.
Full
Setting
1.Select the item to adjust.
2.The screen for adjusting is displayed.
3.By using the [+] [-] keys or the numeric keys, change the setting value.
Items
Main
Main(MPT)
Main(Duplex) Set Main(Duplex) motor's speed cor-
Cassette2
Feed2
Polygon
Exit
Bridge
4.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Items
Set the speed correction value of full speed.
Set main motor's speed correction.
Set Main(MPT) motor's speed correc-
tion
rection
Set Cassette 2 motor's speed correc-
tion
Set Feed 2 motor's speed correction
Set Polygon motor's speed correction
Set Exit motor's speed correction
Set Bridge motor's speed correction
Contents
1-3-42
Contents
Setting range Initial
setting
-50 to 50 1
-50 to 50 1
-50 to 50 -2
-50 to 50 1
-50 to 50 -9
-20 to 20 0
-50 to 50 0
-50 to 50 0
2RG/2RH
Data
varia-
tion
0.1%
0.1%
0.1%
0.1%
0.1%
0.1%
0.1%
0.1%