Kyocera Copystar CS 3011i Service Manual page 177

U240 Finisher operation check
(Message: Check Finisher Operation)
Contents
Turn the finisher's motors and solenoids on.
Purpose
Execute for the finisher's motors and solenoids operation check.
Method
1.Press the [Start] key.
2.Select the item to operate.
*: The screen for setting is displayed.
Motor
Solenoid
Mail Box
Method: Motor
1.Select the item to operate.
2.Press the [Start] key.
*: The operation starts.
Feed In(H)
Feed In(L)
Middle(H)
Middle(L)
Eject(H)
Eject(L)
Save(H) *1
Save(L) *1
Tray
Staple Move
Staple
Width Test(A3)
Width Test(LD)
Beat
Eject Unlock(HP)
Sort Test *1
Eject Unlock(30)
Items
Finisher motor operation check
Finisher solenoid operation check
Mail Box motor operation check
Items
Drive the DF paper entry motor at high speed.
Drive the DF paper entry motor at low speed.
Drive the DF middle motor at high speed.
Drive the DF middle motor at low speed.
Drive the DF exit motor at high speed.
Drive the DF exit motor at low speed.
Drives the DF relief drum motor at high speed
Drives the DF relief drum motor at low speed
Drive the DF tray motor.
Operation pattern: After descending to the lower limit, ascends and
descends again when passing 1s after detecting the middle sensor off.
ascends again when detecting the middle sensor on and stops at the
upper limit.
Drive the DF slide motor.
Drive the DF staple motor.
Drive the DF side registration motor 1, 2.
Drive the DF side registration motor 1, 2.
Drive the DF paddle motor.
Drive the DF exit release motor at the home position.
Execute the DF shift operation.
Drive the DF exit release motor at the 30-sheet bundle position
Contents
Contents
1-3-94
2RG/2RH