Kyocera Copystar CS 3011i Service Manual page 127

U063 Shading position adjustment
(Message: Adjust Shading Position)
Contents
Changes the scanner shading position.
Purpose
Execute if the vertical white lines appears on the image and they are not improved after cleaning the shad-
ing plate, namely there are scratches or dirt inside the shading plate.
By changing the shading position, shading is available where there is no influence of dirt or scratch of the
shading plate.
Setting
1.Press the [Start] key.
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Items
Position
*: If the set value is increased, the shading position moves toward the machine left side and toward the
right side if the value is reduced.
3.Press the [Start] key to set the setting value.
Precautions
Test copy of the original is available by pressing the [System Menu] key as interruption copy mode when
executing this maintenance mode.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Contents
Changes the scanner shading position
1-3-44
Setting range Initial
setting
0 to 18 0
2RG/2RH
Data
varia-
tion
0.16mm