Kyocera Copystar CS 3011i Service Manual page 310

Code Contents
0920 Fax file system error
The backup data is not
retained for file system abnor-
mality of flash memory of the
FAX control PWB.
0980 24 V power down detect
If a 24V power disconnection
signal is observed and a 12V
power disconnection signal is
observed simultaneously for
one second.
1010 Lift motor 1 error
Lift error that occurs when the
lock signal does turn off 510
msec in succession after turn-
ing on the cassette lift motor 1
has occurred five times in suc-
cession.
Related parts
FAX control PWB
Power source
PWB
Cassette lift base
Check that the cassette base can be
elevating
manipulated smoothly, if not, repair or
replace.
mechanism
Lift motor 1
Lift sensor 1
Engine PWB
1-4-17
Check procedures/
corrective measures
1. Execute initializing by U600 (Refer to
the FAX service manual).
2. Replace the FAX control PWB.
1. Check the +24V output is given at YC5
of the power circuit PWB.
2. Replace the power source PWB (see
page 1-5-64)
1. Check that the cassette base has been
ascended.
2. Check the drive gear can rotate or they
are not unusually loaded and, if
necessary, replace.
3. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
Lift motor 1 and Engine PWB (YC13)
4. If the wiring is disconnected, shorted or
grounded, replace the wiring.
5. Replace the lift motor 1.
1. Check that the sensor is correctly
positioned.
2. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
Lift sensor 1 and Engine PWB (YC17)
3. If the wiring is disconnected, shorted or
grounded, replace the wiring.
4. Replace the lift sensor1.
1. Check the engine software and upgrade
to the latest, if necessary.
2. Replace the engine PWB (see page 1-5-
59).
2RG/2RH