Kyocera Copystar CS 3011i Service Manual page 200

U332 Adjusting the black coverage coefficient
(Message: Adjust Coverage Size Calculation Rate)
Contents
Sets the coefficient of custom size with A4/Letter size. The coefficient set here is used to convert the black
ratio in relation to the A4/Letter size and to display the result in the service status page.
Purpose
Set the coefficient for converting the black ratio for custom sizes in relation to the A4/Letter size
Setting
1.Press the [Start] key.
2.Select the item to set.
3.By using the [+] [-] keys or the numeric keys, change the setting value.
Items
Rate
Mode
Level1
Level2
4.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Contents
Set the coefficient for converting the black ratio
for custom sizes in relation to the A4/Letter size.
Switch full-color count and color coverage count
display
Sets low coverage threshold value
Sets middle coverage threshold value
1-3-117
2RG/2RH
Setting range Initial set-
0.1 to 3.0 1.0
0: Full color 0
1: by coverage
0.1 to 99.8 1.0
0.2 to 99.9 2.5
ting