Kyocera Copystar CS 3011i Service Manual page 137

U073 Scanner motor operation check
(Message: Check Scanner Motor Operation)
Contents
Simulate the scanner operation in any condition.
Purpose
Execute the scanner operation to check the abnormal operation and dust adhesion on the slit glass.
Method
1.Press the [Start] key.
2.Select the item to execute.
Scanner Motor
Home Position
Dust Check
DP Reading
3.Select [Execute].
4.Press the [Start] key.
*: Scanning starts with the condition specified.
5.To stop the operation, press the [Stop] key.
Setting: Scanner Motor
1.Select the item to set.
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Items
Zoom
Size
Lamp
Paper size corresponding to each set value
setting
4300
5000
5000
5100
5100
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Items
Execute the scan operation
Home positioning operation
Check if there is dust by turning the exposure lamp on
scan position operation for the document processor
Magnification
Original size
Turning the exposure lamp on/off
Destination
B5
A4
A5R
11"×8 1/2"
5 1/2"×8 1/2"
Contents
setting Destination
6100 B5R
6600 8 1/2"×11"
7100 A4R
7800 Folio
8400 8 1/2"×14"
1-3-54
Contents
Setting range Initial
setting
25 to 400 (%) 100
100 to 10200 10200
0: OFF 1: ON
1: ON
setting
8600 B4
9000 11"×15"
10000 A3
10200 11"×17"
2RG/2RH
Data
varia-
tion
1%
100
-
Destination