Kyocera Copystar CS 3011i Service Manual page 436

22. Remove seven connectors and release
two wire saddles.
23. Detach six screws and then remove the
controller box.
24. Remove the wire from the saddle of the
wire guide.
25. Release the hook, lift the wire guide in
front and remove it.
Screw
Screw
Wire saddles
Controller box
Figure 1-5-78
Wires
Wire guide
Figure 1-5-79
1-5-46
Screws
Connectors
Screws
Connectors
Saddles
2RG/2RH
Hook