Huawei FusionModule800 Installation Manual page 38

FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
5.
Issue 10 (2019-12-20)
Figure 3-3 Removing the L-shaped brackets
Figure 3-4 Installing the cabinet lower sealing plates
The middle two screws in the cabinet rear are used to secure the latch.
Connect the ramps to the rear door side of the pallet and extend the ramps, and then
clamp the sliders at the bottom of the ramps, as shown in
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation
Figure 3-5.
29