Securing An Outdoor Unit - Huawei FusionModule800 Installation Manual

FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)

3.7.4.3 Securing an Outdoor Unit

Prerequisites


Context



Procedure
Step 1 Determine the four mounting holes of the outdoor unit based on the installation dimensions
and drill holes in the concrete base.
Step 2 Align the outdoor unit mounting holes with the holes in the concrete base, and secure the
outdoor unit to the concrete base using four M10 expansion bolts, as shown in
Issue 10 (2019-12-20)
The M10 expansion bolts used for securing an outdoor unit have been prepared.
The concrete groundwork is prepared.
Move the outdoor unit close to the installation position before unpacking. You are
recommended to stand the outdoor unit during transportation. If tilt is not avoidable, the
tilt degree cannot exceed 15° .
Do not hold the fan guard on the shell. Otherwise, it will be deformed.
Do not touch the blades using hand or any other object.
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation
Figure 3-49.
71