Huawei FusionModule800 Installation Manual page 4

FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
Symbol
Change History
Changes between document issues are cumulative. The latest document issue contains all
updates made in previous issues.
Issue 10 (2019-12-20)
Updated the safety information.
Issue 09 (2019-11-26)
Updated the password change description.
Issue 08 (2019-02-20)
Updated the manual name and so on.
Issue 07 (2018-09-26)
Replaced the PDU2000 02120837 with 02120837-009.
Deleted the description related to the BOM number of the 04151747 cable.
Issue 06 (2018-08-05)
Added VCN540 and changed VCN500 to VCN.
Connect the VCN cable to the PoE_1 port on the smart ETH gateway.
Modified the section "Commission the CIM and Battery Interface Module (BIM)."
Issue 05 (2017-12-15)
This issue is the fifth official release.
Modified the smart cooling product refrigerant to be charged.
Issue 04 (2017-09-15)
This issue is the fourth official release.





Issue 10 (2019-12-20)
Added the description about power cable specifications.
Optimized the figures of smart cooling product indoor units.
Added email alarm settings.
Optimized the description about access actuator cabling requirements.
Added the emergency fan wiring port and cabling route.
Copyright © Huawei Technologies Co., Ltd.
Description
Supplements the important information in the main text.
NOTE is used to address information not related to personal
injury, equipment damage, and environment deterioration.
About This Document
iii