Huawei FusionModule800 Installation Manual page 106

FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
Figure 3-77 Front panel of the smart cooling product control unit
(1) Ground point
(4) FE_2 port for connecting
a smart ETH gateway PoE or
LAN ports on the ECC
(7) RS485/12 V port for
connecting the T/H sensor
(10) CAN_OUT (output port
of the teamwork CAN and
northbound RS485 port)
Figure 3-78 Rear panel of the smart cooling product control unit
(1) J5 port (reserved)
(4) OUT1 port
(7) INPUT1 port
(10) J6 port (reserved)
Issue 10 (2019-12-20)
(2) Rectifier
(5) FE_1 port for connecting
a smart ETH gateway PoE
or LAN ports on the ECC
(8) Dual in-line package
(DIP) switch
(11) Main control module
(2) J1 port
(5) J3 port
(8) J4 port
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation
(3) PSU
(6) CAN_IN (input port of
the teamwork CAN and
northbound RS485 port)
(9) COM
(3) J2 port
(6) OUT2 port (reserved)
(9) INPUT2 port (reserved)
97