FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
3.
Issue 10 (2019-12-20)
Figure 3-34 Removing guide rails
Remove screws from the mounting bar and move the entire mounting bar 50 mm
towards the cabinet exterior, as shown in
To remove one mounting bar, remove the four screws from the upper and lower and the four screws
in the middle that secure the mounting bar to the cabinet.
If there are guide rails fixed on mounting bars, remove the guide rails before moving the mounting
bars.
Copyright © Huawei Technologies Co., Ltd.
Figure
3-35.
3 Hardware Installation
61