Huawei FusionModule800 Installation Manual page 283

FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
Exception Handling
Step 1 Check that you have exited the diagnostic mode on the ECC800 WebUI.
Step 2 Check that the T/H control mode and T/H setpoint are properly set.
Step 3 Check that the current time is correctly set.
Step 4 Check that the air filter is installed in the correct direction.
----End
Issue 10 (2019-12-20) Copyright © Huawei Technologies Co., Ltd.
6 Power-On Commissioning
274