SMART Embedded Computing AXP1440-C07 Installation And Use Manual page 17

Conventions
The following table describes the conventions used throughout this manual.
Notation
0x00000000
0b0000
bold
Screen
Courier +
Bold
Reference
File > Exit
<text>
[text]
...
.
.
.
..
|
AXP1440-C07 Installation and Use (6806800V18A)
Description
Typical notation for hexadecimal numbers (digits are 0 through F), for example
used for addresses and offsets
Same for binary numbers (digits are 0 and 1)
Used to emphasize a word
Used for on-screen output and code related elements or commands in body text
Used to characterize user input and to separate it from system output
Used for references and for table and figure descriptions
Notation for selecting a submenu
Notation for variables and keys
Notation for software buttons to click on the screen and parameter description
Repeated item for example node 1, node 2, ..., node 12
Omission of information from example/command that is not necessary at the time
being
Ranges, for example: 0..4 means one of the integers 0,1,2,3, and 4 (used in
registers)
Logical OR
Indicates a hazardous situation which, if not avoided, could result in death or
serious injury
Indicates a hazardous situation which, if not avoided, may result in minor or
moderate injury
About this Manual
15