5.12.1.2 Fan Tray Upgrade Sample Output - SMART Embedded Computing AXP1440-C07 Installation And Use Manual

If necessary, it is possible to revert to the previous firmware version using this command:
upgradeftm upper | lower rollback

5.12.1.2 Fan Tray Upgrade Sample Output

The sample output for these commands for the UFT1440-D is shown below.
# upgradeftm upper /tmp/ftm14x0_hpm1fw.img
Upgrading...
ipmitool_v0.9 -H 192.168.24.11 -t 0x58 -U openhpi -P openhpi hpm \
PICMG HPM.1 Upgrade Agent 0.4:
Validating firmware image integrity...OK
Performing preparation stage...OK
Target Product ID
Target Manufacturer ID: 161
Performing upgrade stage:
Upgrading H8S-ATCA F/W
with Version: Major: 1
Firmware size: 171840
Writing firmware: 100% completed
Firmware upgrade procedure successful
ipmitool returned 0.
Activating...
ipmitool_v0.9 -H 192.168.24.11 -t0x56 -U openhpi -P openhpi hpm
activate
PICMG HPM.1 Upgrade Agent 0.4:
ipmitool returned 0.
/bin/upgradeftm: Upgrade and activate complete.
Verify firmware version:
clia ipmc -v 0x56
Pigeon Point Shelf Manager Command Line Interpreter
AXP1440-C07 Installation and Use (6806800V18A)
upgrade /var/nvdata/ftm14x0_hpm1fw.img
: 95
Minor: 8
Aux : 000 000 000 000
AXP1440-C07 Shelf Installation
107