Provisioning Tasks; Setting Date And Time; Configuration Menu - Date And Time - ADC HiGain H2TU-C-388 User Manual

152-388-100-02, Issue 2
P T
ROVISIONING
After the HiGain Line Unit is successfully installed, perform these basic provisioning tasks:
1 Set the date and time (see
2 Set the circuit ID numbers (see
3 Make any necessary configuration changes (see
4 Clear history, alarm, and event log screens to remove miscellaneous data during startup (see
History, Alarm, and Event Log Screens" on page

Setting Date and Time

Monitor Performance
ID: xxxx--xxxx--xxxx--xxxx
1 Type to select the Config menu.
C
2 Select Date and Time, then press
3 Enter the date in the format indicated, then press
4 Enter the time in the format indicated (entering seconds is optional), then press
H2TU-C-388 List 1
ASKS
"Setting Date and Time"
"Setting Circuit ID Numbers" on page
Event Log Config
+----------------------+
| Standard Options ->
| PairGain Options ->
| Date and Time
+-------------------------------+
| Date (mm/dd/yyyy):
| Time (hh:mm[:ss]): 12:30:01
+-------------------------------+
04/15/00 12:30:01
Figure 4. Configuration Menu - Date and Time
.
ENTER
June 6, 2000
on this page)
14)
"Configuring the System" on page
21)
Inventory Rlogon
|
|
-> |
04/15/2000
H2TU-C
.
ENTER
Provisioning
15)
"Clearing the
Help
|
|
System: OK
.
ENTER
13