Table of Contents
Advertisement
AT commands
P1 (DIO11 Configuration)
Sets or displays the DIO11 configuration (Micro pin 8/SMT pin 8/TH pin 7).
Parameter range
0, 2 - 5
Parameter
0
1
2
3
4
5
Default
0
P2 (DIO12/TH_SPI_MISO Configuration)
Sets or displays the DIO12 configuration (Micro pin 5/SMT pin 5/TH pin 4).
Parameter range
SMT/MMT: 0, 3 - 5
TH: 0, 1, 3 - 5
Parameter
0
1
3
4
5
Default
0
P5 (DIO15/SPI_MISO Configuration)
Sets or displays the DIO15 configuration (Micro pin 16/SMT pin 17/TH Pin N/A).
Note
The DIO15 configuration is not available with the XBee 3 through-hole module.
Digi XBee® 3 Zigbee® RF Module
Description
Disabled
N/A
PWM1 output.
M1 (PWM1 Duty Cycle)
Digital input
Digital output, low
Digital output, high
Description
Disabled
SPI_MISO for the through-hole device
N/A for the surface-mount and micro device
Digital input
Digital output, low
Digital output, high
I/O settings commands
controls the value.
219
Advertisement
Table of Contents
