P1 (Dio11/Pwm1 Configuration); P2 (Dio12/Th_Spi_Miso Configuration) - Digi XBee 3802.15.4 User Manual

AT commands
Parameter Description
0 Disabled
1 RSSI PWM output
PWM0 output.
2
3 Digital input
4 Digital output, low
5 Digital output, high
Default
1

P1 (DIO11/PWM1 Configuration)

Sets or displays the DIO11/PWM1 configuration (Micro pin 8/SMT pin 8/TH pin 7).
When configured as PWM output (2): you can use M1 to explicitly control the PWM1 output. When used
with Analog line passing, PWM corresponds with ADC1.
Parameter range
0, 2 - 5
Parameter Description
0 Disabled
1 N/A
PWM1 output.
2
3 Digital input
4 Digital output, low
5 Digital output, high
Default
0

P2 (DIO12/TH_SPI_MISO Configuration)

Sets or displays the DIO12/TH_SPI_MISO configuration (Micro pin 5/SMT pin 5/TH pin 4).
Parameter range
SMT/MMT: 0, 3 - 5
TH: 0, 1, 3 - 5
Digi XBee® 3 802.15.4 RF Module User Guide
M0 (PWM0 Duty Cycle) or I/O line passing
M1 (PWM1 Duty Cycle) or I/O line passing
I/O settings commands
control the value.
control the value.
161