P1 (Dio11/Pwm1 Configuration); P2 (Dio12/Spi_Miso Configuration) - Digi DigiMesh XBee S2C User Manual

AT commands
Parameter Description
3 Digital input
4 Digital output, low
5 Digital output, high
Default
1

P1 (DIO11/PWM1 Configuration)

Sets or displays the DIO11/PWM1 configuration (TH pin 7/SMT pin 8).
Parameter range
0 - 5
Parameter Description
0 Disabled
1 N/A
PWM1 output. Value is controlled by M1 parameter or by I/O line passing
2
3 Digital input
4 Digital output, low
5 Digital output, high
Default
0

P2 (DIO12/SPI_MISO Configuration)

Sets or displays the DIO12/SPI_MISO configuration (TH pin 4/SMT pin 5).
Parameter range
1, 3 - 5
Parameter
0
1
2
3
XBee S2C DigiMesh 2.4 User Guide
Description
Disabled
SPI_MISO for the through-hole device
N/A for the surface-mount device
N/A
Digital input
I/O settings commands
97