P0 (Dio10/Rssi/Pwm0 Configuration); P1 (Dio11/Pwm1 Configuration) - Digi XBee SX 868 User Manual

AT commands
Parameter
0
1
2
3
4
5
6
Default
1

P0 (DIO10/RSSI/PWM0 Configuration)

This command applies to the XBee SX 868 RF Module.
Sets or displays the PWM0/RSSI/DIO10 configuration (pin 7).
Parameter range
0 - 5
Parameter
0
1
2
3
4
5
Default
1

P1 (DIO11/PWM1 Configuration)

This command applies to the XBee SX 868 RF Module.
Sets or displays the DIO11/PWM1 configuration (pin 8).
Parameter range
0 - 5
XBee® SX 868 RF Module User Guide
Description
Disabled
ON/SLEEP output
N/A
Digital input
Digital output, low
Digital output, high
Synchronous pulse output
Description
Disabled
RSSI PWM0 output
PWM0 output
Digital input
Digital output, low
Digital output, high
I/O settings commands
138