Eo (Encryption Options); Dm (Disable Features) - Digi XBee 3 ZigBee User Manual

AT commands
Parameter
0
1
Default
0

EO (Encryption Options)

A bitfield that contains advanced encryption options that do not have dedicated AT commands. These
options are only applicable when encryption is enabled (EE = 1).
Leave unused bits clear so future encryption options are not inadvertently enabled during a firmware
update.
Bit field:
Bit Description
0 Send/receive NWK keys in the clear (unsecure).
1 = Centralized Trust Center.
1
0 = Distributed Trust Center.
2 Use EUI64-hashed link keys (used on centralized trust center only).
3 Emit join notification frames (used on centralized trust center only).
4 Allow joining using well-known default link keys (unsecure).
5 - 15 Reserved.
Parameter range
0 - 0xFF
Default
2

DM (Disable Features)

A bit field mask that you can use to enable or disable specific features.
Bit Description
Reserved
0
1 Reserved
Digi XBee® 3 Zigbee® RF Module
Description
Encryption Disabled
Encryption Enabled
Security commands
186