Update The Firmware Over-The-Air - Digi XBee 3 ZigBee User Manual

Update the firmware over-the-air

The XBee 3 Zigbee RF Module supports firmware over-the-air (FOTA) updates. To perform an FOTA
update, the device to be updated must be associated and communicable with a Zigbee network. In
this section, the node performing the update is considered the server and the node being updated is
the client.
Use XCTU to perform the FOTA update using the following process:
Add the device to XCTU
Update to the latest firmware
Digi XBee® 3 Zigbee® RF Module
24
24
23