Vh (Bootloader Version); Hv (Hardware Version); C (Hardware/Software Compatibility); P (Invoke Bootloader) - Digi XBee 3 ZigBee User Manual

Rf module
Table of Contents

Advertisement

AT commands
Parameter range
Multi-line string [read-only]
Default
N/A

VH (Bootloader Version)

Reads the bootloader version of the device.
Parameter range
N/A
Default
N/A

HV (Hardware Version)

Display the hardware version number of the device.
Parameter range
0 - 0xFFFF [read-only]
Default
Set in firmware

%C (Hardware/Software Compatibility)

Specifies what firmware is compatible with this device's hardware. %C is compared to the to the
"compatibility_number" field of the firmware configuration xml file. Firmware with a compatibility
number lower than the value returned by %C cannot be loaded onto the board. If an invalid firmware
is loaded, the device will not boot until a valid firmware is reloaded.
Parameter range
[read-only]
Default
N/A

%P (Invoke Bootloader)

Forces the device to reset into the bootloader menu.
This command can only be issued locally.
Parameter range
N/A
Default
N/A
Digi XBee® 3 Zigbee® RF Module
Diagnostic commands
228

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XBee 3 ZigBee and is the answer not in the manual?

Table of Contents