Digi XBee 3 ZigBee User Manual page 307

Status Transparent
code mode string Description
0x02 Joining An association request is being made.
0x03 Joined Joined - Coordinator "Formed:", Router/End
Device "Joined"
0x04 Beacon Data received from a neighboring node in
Response response to a beacon request
Reject ZS Not an association candidate because ZS does
0x05
not match that given in the beacon response.
Status data Description
radioChannel channel number ranging from 11 to 26 (0x0B to 0x1A)
(1)
radioTxPower low level signed byte value for transmit power, values range
(1) from 0xC9 to 0x05 inclusive
panid(2) 16 bit 4med' a network, or a Router/End Device has 'joined' a
network.
extendedPanId 64 bit PAN Identifier for network
(8)
See ZS (Zigbee Stack
ZS
[stackProfile]
(1)
extendedPanId 64 bit PAN Identifier for network
(8)
allowingJoin(1) 0x00 - not permitting joins to its network
0x01 - permitting joins to its network
radioChannel channel number ranging from 11 to 26 (0x0B to 0x1A)
(1)
panid(2) 16 bit PAN Identifier for network
rssi(1) maximum relative signal strength indicator value measured
in units of dBm
lqi link quality indicator
Profile).