Application Messaging Framework - Digi XBee 3 ZigBee User Manual

Zigbee networks
1. Set NJ (Node Join Time)
restrict joining (recommended).
2. Use the Commissioning pushbutton or
short time; for more information, see

Application messaging framework

If none of the previous mechanisms are feasible, you can build a messaging framework between the
coordinator and devices that join its network into the application. For example, the application code in
joining devices could send a transmission to the coordinator after joining a network, and wait to
receive a defined reply message. If the application does not receive the expected response message
after joining, it could force the device to leave and continue scanning; see
Digi XBee® 3 Zigbee® RF Module
to a value less than 0xFF on all routers and coordinator devices to
CB (Commissioning Pushbutton)
Network commissioning and
Channel scanning
to allow joining for a
diagnostics.
NR (Network Reset).
94