SET Command Parameters and Qualifiers,
PASSWORD
Format
Example
Lets you sets a new console password.
The following are key points to remember about passwords:
The console secure jumper must be installed on the I/O
module.
The password must be exactly 16 hexadecimal characters.
You can use 0 to 9 and A to F.
The password feature is enabled when SECURE = ON.
The password feature is disabled when SECURE = OFF.
Return
>>> SET PASSWORD
This example sets the password:
Return
>>> SET PASSWORD
Result:
PSWD0> old_password
PSWD1> new_password
PSWD3> new_password
>>>
!Enter the old password (if any).)
!Enter the new password.
!Reenter the new password for verification.
Continued
Continued on next page
3–31