SET Command Parameters and Qualifiers,
DIAG_LOE
Format
Qualifier
Example
Allows a diagnostic to loop on an error, with all output suppressed.
To exit the diagnostic error loop, press the Halt button to return
to the diagnostic environment (console mode or service mode).
This feature is available on loadable diagnostics only.
>>> SET DIAG_LOE {qualifier}
Use one of the following qualifiers when setting the DIAG_LOE
parameter:
Qualifier
Description
ON
Enables the loop-on-error feature.
OFF
Disables the loop-on-error feature.
This example sets the loop-on-error feature:
>>>SET DIAG_LOE ON
Result:
DIAG_LOE = ON
Return
Return
Continued
Continued on next page
3–23