Digital Equipment DEC 3000 Series Service Information page 346

Installation Procedure
(H9A00-AJ Cabinet),
Install the
Bottom Air
Deflector
Assembly
F–8
Continued
Required materials:

Four 10/32 screws with integral washers

12 clip nuts (PN 90–07786–00)

Bottom air deflector assembly (assembled in the previous
section)
To install the bottom air deflector assembly (Figure F–3):
Steps Action
1 Attach one clip nut to each tab
shown in Figure F–3.
2 Count up two holes from the bottom of the installation
area on the front and rear cabinet rails.
3 Use the four 10/32 screws to secure the bottom air
deflector assembly to the cabinet rails.
4 Install clip nuts in holes 6, 10, 12, and 18 on the front
cabinet rails. Install clip nuts in holes 6, 10, 20, and 23
on the rear cabinet rails. See Figure F–1.
on the deflector, as
Continued on next page