Digital Equipment DEC 3000 Series Service Information page 79

SET Command Parameters and Qualifiers,
BOOT_OSFLAGS
Format
Value
Example
Defines additional default parameters to pass to the system
software during booting.
>>> SET BOOT_OSFLAGS {value}
You can use the following values with the OSFLAGS command:
Root R5 Contents
0 0
1
E 0
0 1
1
If installed on disk
This example specifies a default boot of the operating system:
>>> SET BOOT_OSFLAGS 0,0
Return
Description
Default boot of operating system
Standalone backup boot
Conversional boot
Return
Continued on next page
Continued
3–21