Digital Equipment DEC 3000 Series Service Information page 78

SET Command Parameters and Qualifiers,
BOOTDEF_DEV
Format
Qualifier
Example
3–20
Defines the default device that the operating system will
bootstrap. The device names must be valid boot devices supported
by the BOOT command.
Use the SHOW DEVICE command to display the available boot
devices.
>>> SET BOOTDEF_DEV {qualifier}
See the BOOT command.
This example sets the boot default to DKA200:
>>> SET BOOTDEF_DEV DKA200
Result:
BOOT = DKA200
Continued
Return
Return
Continued on next page