Digital Equipment DEC 3000 Series Service Information page 356

Installation Procedure
(H9A00-AJ Cabinet),
Install Chassis
Slide Support
Brackets
F–18
Continued
Required materials:

Three support brackets (PN 74–45547–01)

Six nuts
To install the chassis slide support brackets (Figure F–8):
Steps Action
1 Slide out the stabilizer bar
the system being installed (if not already out).
2 Fully extend both chassis slide assemblies
3 Use the six nuts to secure the three support brackets
to the chassis slide assembly. Do not tighten the nuts.
to support the weight of
.
Continued on next page