Digital Equipment DEC 3000 Series Service Information page 287
Hide thumbs
Also See for DEC 3000 Series:
- Service manual (92 pages) ,
- Options manual (102 pages) ,
- Service information (436 pages)
Table of Contents
Advertisement
SCC Diagnostic Status/Error Messages,
? T-ERR-SCC-MODEM - CTS bit Exp = 0 Rec = 1
This message indicates the modem test expected the
CTS bit to be set to 0 but it was read as a 1.
? T-ERR-SCC-MODEM - CTS bit Exp = 1 Rec = 0
This message indicates the modem test expected the
CTS bit to be set, but it is clear.
? T-ERR-SCC-MODEM - DSR bit Exp = 0 Rec = 1
This message indicates the modem test expected the
DSR bit to be set to 0, but it was read as a 1.
? T-ERR-SCC-MODEM - DSR bit Exp = 1 Rec = 0
This message indicates the modem test expected the
DSR bit to be set, but it is clear.
? T-ERR-SCC-MODEM - DCD bit Exp = 0 Rec = 1
This message indicates the modem test expected the
DCD bit to be set to 0, but it was read as a 1.
? T-ERR-SCC-MODEM - DCD bit Exp = 1 Rec = 0
This message indicates the modem test expected the
DCD bit to be set, but it is clear.
? T-ERR-SCC-MODEM - RI bit Exp = 0 Rec = 1
This message indicates the modem test expected the RI
bit to be set to 0, but it was read as a 1.
Continued
Continued on next page
C–35
Advertisement
Table of Contents
Troubleshooting
