Digital Equipment DEC 3000 Series Service Information page 90

SET Command Parameters and Qualifiers,
RADIX
Format
Qualifier
Example
3–32
Specifies the default radix (base number). The default setting is
hexadecimal.
>>> SET RADIX {qualifier}
Select one of the following qualifiers to set the base address:
Qualifier Description
0 Default base address (hexadecimal)
10 Decimal base address
16 Hexadecimal base address
This example sets the address to a decimal base address:
Return
>>> SET RADIX 10
Result:
RADIX = 10
Return
Continued on next page
Continued