Digital Equipment DEC 3000 Series Service Information page 324

Installation Procedure
(IEC RS–310 Cabinet),
Install the
Chassis Slide
Support
Brackets
E–18
Continued
Required materials:

Three support brackets (PN 74–45547–01)

Six nuts
To install the chassis slide support brackets (Figure E–8):
Steps Action
1 Slide out the stabilizer bar
system being installed.
2 Fully extend both chassis slide assemblies
3 Use the six nuts to secure the three support brackets
to the chassis slide assemblies. Do not tighten the nuts.
to support the weight of the
.
Continued on next page