Digital Equipment DEC 3000 Series Service Information page 350

Installation Procedure
(H9A00-AJ Cabinet),
Install the
Right Side
Chassis Slide
Assembly
F–12
Continued
Required materials:

Right side chassis slide assembly (assembled in the previous
section)

Two 10/32 screws
To install the right side chassis slide assembly, perform the
following (Figure F–5):
Step Action
1 Count up 6 holes from the bottom of the installation area
on the front and rear cabinet rails.
2 Count up 10 holes from the bottom of the installation
area on the front and rear cabinet rails.
3 Align the chassis slide assembly
tenth hole, then secure the assembly to the cabinet rails
.
4 Tighten the two screws at the rear slide mounting
bracket.
to the sixth and
Continued on next page