Digital Equipment DEC 3000 Series Service Information page 116

SHOW Command Parameters,
SCSI_RESET
Format
Values
Example
3–58
Displays the current time-delay setting.
>>> SHOW SCSI_RESET
The SHOW SCSI_RESET command displays a value from 0 to 7.
Value Device Booted
3 Floppy drive
4 Tape drive
6 CD–ROM
This example shows the current value of the SCSI reset is set to
4, for booting from a tape drive:
>>> SHOW SCSI_RESET
Result:
SCSI_RESET = 4
Continued
Return
Return
Continued on next page